RHYTHMERfor FM-1
M–VAVE FM–1 / PUBLIC BETA

INSTALL RHYTHMER.

Connect your FM-1. Press Install. Review the backup and target; the firmware package already includes both Break loops.

Already using Rhythmer? Open the USB editor to back up your music → · Explore the browser workspace ↗

COMPLETE INSTALLATION

One install. Two breaks ready.

Rhythmer + A / Amen + B / Think. Both loops are two bars at 160 BPM, mono 16 kHz / 12-bit. Official V15 recovery is included; official V16 is accepted as a separately selected, verified original file; no file search or sample-loading step is needed.

Chrome / Edge · USB data cable · final device-write confirmation required.

THIRD-PARTY AUDIO

A / Amen — The Winstons, “Amen, Brother”.
B / Think — Lyn Collins, “Think (About It)”.

These original recordings are separate from the firmware license. Public redistribution permission has not been documented; credits do not grant it. The project owner directs distribution with credits; this is not rights-holder permission.

SAMPLE SOURCES & RIGHTS →
AUDIO NOTICE ↓

INCLUDED THINK / TWO-BAR DRUM EDIT

Supported starting points: official V15 and V16.

Back up your music. Install directly from official V15 or V16; keep the matching original recovery firmware. Use the source firmware’s documented official-recovery route if you are coming from another custom firmware. RHYTHMER and JAZZY can both update directly to RHYTHMER after backup; official V15 is not required between these companion firmwares. V15 recovery is a firmware change and may make existing music unreadable.

V15 / V16 · newer FM-1 flash support

Install directly from official V15, official V16, RHYTHMER or JAZZY after backup and review. V15 is included; for a unit running V16, select M-VAVE’s unmodified V16 FM-1.fwsc before continuing. Keep the matching original firmware for recovery. Other custom firmwares must use their own documented return-to-official route first.

V15 selected. Changing this selection never writes to the FM-1.

M-VAVE official V16 download → · Select the original firmware file ↓

The firmware accepts the original Puya 0x856014 and newer UC25HQ80 0xB36014. This page cannot read the chip ID through the current MIDI protocol; it does not identify hardware from its colour, logo or firmware name. Older installed firmware may still refuse update entry.

Recovery keeps the device’s boot-area match check. A V15/V16 mismatch is stopped rather than forced. Full hardware compatibility is not established by a successful browser check.

If installation stops, download the diagnostic report: it records the source, selected recovery, target SHA, browser, transfer phase and request counters. A failed final identity check may happen after the firmware has been written. If no MIDI loader is visible, this page cannot perform ROM/Transporter recovery.

Installer update: 20261116.1 · V15/V16 package verification and source routing based on JIANT’s current public installer (V10.7.17); refusal diagnostics cross-checked against Skiff 2.5.1. No firmware, audio or polyphony changes. Bounded MIDI and download waits, JAZZY port recognition and reconnect handling are included.

Public beta · review the exact-build test scope.

Browser and native tests do not establish safe flashing, power-loss recovery or sustained operation on a real FM-1. Back up before installing. RHYTHMER ↔ JAZZY supports direct installation after backup. For another firmware family, use its documented return-to-official route first; do not force a V15 downgrade. Keep a stable USB connection and power. Do not unplug during a transfer.

Updating from the previous beta? Back up first. PHASE, LOFI and WHEEL tracks use Analog when loaded in this version. Keep your original projects if you want to use those engines again.

Rhythmer is independent: no affiliation, sponsorship or endorsement by M-VAVE. To the extent permitted by law, it is supplied without warranty and its authors/contributors disclaim liability for device damage, malfunction or data loss. Mandatory statutory rights and non-excludable liability remain unaffected. Full risk & independence notice →

01 / AUTOMATIC CHECKS

Recovery is already here.

The unmodified official V15 recovery image comes from M-VAVE’s FM1 Open repository. Its Apache-2.0 resource terms and attribution documents are included. The browser checks its exact size, SHA-256 and internal package layout before enabling installation or recovery.

Checking the included official V15…

Checking the complete installation bundle…

Official V15 / V16 file selection and source licenses

Pinned official source and hashes · Apache-2.0 · M-VAVE resource terms and notices · Recovery notice.

V15 / 699,956 bytes / FM-1_015
db1642b2b6fa5c2cccb11ffd13878068bb28601678d3644049f99dc40e7edb8a

The included copy needs no manual selection. An optional recovery file must be unmodified official firmware; V15 and V16 are accepted only when their exact official size, SHA-256 and package structure match. Modified files are rejected.

02 / CONNECT

One FM-1. A data cable.

Use desktop Chrome or Edge on localhost or HTTPS. Connect only one FM-1, stop playback, and close DAWs, other installers and USB editors. The Install button handles connection and inspection automatically. The separate control below is available for a read-only inspection.

Not connected.

03 / BACKUP

Keep the music first.

For supported custom firmware, read every object offered by its archive protocol and check each CRC. Keep the archive and use that firmware’s own editor to restore it. Rhythmer archives include projects, presets and settings; they do not contain Break audio. Keep your original audio files separately.

Inspect the device first.

04 / REVIEW

Firmware + Amen + Think.

The integrated firmware image includes Amen (A) and the corrected two-bar Think drum edit (B). One firmware transfer installs the complete package; there is no separate sample upload. A/B factory audio is replaced during installation. The loader validates both banks before reporting success and writes only the app and fixed audio banks, preserving project/settings sectors.

Nothing has been written.

DOWNLOAD DIAGNOSTIC REPORT ↓

If an update is interrupted.

An update interrupted by power loss can leave a dark screen and no USB device, requiring external hardware recovery. Reconnect with stable power and inspect again. This page can recognize the FM-1 update loader. It never resumes automatically. Reopen the same mode and use the included verified target bundle, then explicitly review the resume operation. A saved Rhythmer session must match this build’s hash; an unknown loader session requires a reviewed matching official recovery package. If the device cannot expose a responding MIDI loader, browser recovery cannot proceed; consult the manufacturer/community recovery instructions.

Returning to V15 writes the verified official firmware and checks that the device reports FM-1_015. It does not restore custom projects into stock firmware or remove every byte of custom data from unused flash.

Update transport and package verification adapted from JIANT ↗ / Felucca. Pinned source · GPL-3.0 license. Included V15 resource license: Apache-2.0. V16 is selected locally from M-VAVE’s original download. Recording rights are separate. No external telemetry. No writes before your final confirmation.

RHYTHMER ↔ JAZZY / DIRECT UPDATE Both companion firmwares can update directly after the automatic backup and final review. No V15 detour is required. Firmware installation replaces Break A/B with the bundled loops; keep your own audio and .slot banks. Musical compatibility may differ between the two OSes.

RESTORED SINGLE-BREAK BASE / 20261112.1 — One Break track. HYDRA legato, LXR track ENV and zero default sends are included. Read release and rollback notes →

Waiting for the FM-1?

Keep this tab visible, the computer awake and USB/power connected. Loader and firmware reconnection can pause the percentage while USB MIDI ports change. The elapsed time, last-request counter and transfer log show the current stage.

If an error appears, download the report and inspect the FM-1 before retrying. A failed final check can happen after the firmware has already been installed. Resume only the same reviewed package with a matching loader/checkpoint. Stage-by-stage troubleshooting →

Installer maintenance 20261116.1 · firmware build remains 20261112.1.

FINAL REVIEW / DEVICE WRITE

Install Rhythmer?

This next action writes to the connected FM-1. Keep USB and power connected until verification finishes.

Amen / Think are third-party recordings. The audio notice identifies the sources; it does not grant usage or redistribution rights.